Solutions for the housing technology Fire Protection Systems

ROKU® System FPCM Combined Penetration Seal

EI 60 / 90 / 120

The ROKU® system FPCM consists of the fire protection mortar ROKU® FPCM and the ROKU® AWM II fire protection sleeve, the ROKU® Strip fire protection strip (width 50 mm), the ROKU® IM cable bandage or the ROKU® MFC 200 fire protection coating. Electrical cables (single, in harnesses or on a cable tray) with individual diameters of up to 80 mm can be fed through the aperture in the partition. Similarly, cable conduit made of polyolefin with individual diameters of up to 40 mm or bundle diameters of up to 110 mm may be passed through the partition. In addition, non-combustible pipes insulated with mineral wool or synthetic rubber and having diameters of up to 168.3 mm can be sealed off. The cables on either side of the partition are either wrapped with the cable bandage ROKU® IW or coated with the fire protection coating ROKU® MFC 200.


  • Solid walls ≥ 100 mm and solid ceilings ≥ 150 mm
  • Insulation thickness in walls and ceilings ≥ 170 mm
  • Max. aperture size 1200 x 2000 mm with and without cable tray designed to support cables with max. Ø 80 mm
  • Cable harness up to Ø 100 mm for individual cable diameters of up to 21 mm
  • Coaxial or waveguide cables
  • Conduit made of polyolefin or steel for individual cable diameters of up to 40 mm or with max. Ø 110 mm in a harness
  • Non-combustible pipes with mineral wool insulation with max. Ø 168,3 mm
  • Copper pipes with Armaflex Protect insulation with max. Ø 88,9 mm


  • Easy installation and subsequent installation
  • Fire protection coating ROKU® MFC 200 is suitable for the application in wet and humid areas
  • High flexibility

Supplied form

Supplied form FPCM Combined Penetration Seal


Fire protection systems and solutions in the field of housing technology
Combustible Pipes Non-Combustible Pipes Electrical Lines

Available documents:

Technical Data Sheet